Candice is a pair of close-fitting flared trousers. There are slash pockets on the front, as well as a yoke and patch pockets on the back. Each of the back legs is made up of two pieces and has a seam at the knee level. The waistband features topstitched belt loops. The upper edge of the waistband sits at the natural waistline. The trousers have a fly front zipper closure. The waistband fastens with a set-in snap. The trousers feature decorative topstitching along the pockets, waistband, belt loops, crotch and side seams. Candice is below-ankle length.
Model: Height 171 cm (5’7”), Bust 86 cm (33 7/8”), Waist 63 cm (24 3/4”), Hips 92 cm (36 1/4”). Ksenia is wearing size 36 in height 2.
Approximate sewing time — 2 days (12–16 hours).
Sizing: this pattern is multisized — has sizes US 2 - 20 / EU 34 - 52 / UK 6 - 24 nested on one pattern sheet, just choose your height.
Please also check Size chart and Garment length, sleeve length tabs for more information.
WOMEN SIZING
For women garments with separate distinct sizes:
| Size | US 2 / EU 34 / UK 6 | US 4 / EU 36 / UK 8 | US 6 / EU 38 / UK 10 | US 8 / EU 40 / UK 12 | US 10 / EU 42 / UK 14 |
| Bust, cm | 80 | 84 | 88 | 92 | 96 |
| Waist, cm | 60 | 64 | 68 | 72 | 76 |
| Hips, cm | 86 | 90 | 94 | 98 | 102 |
| Upper arm, cm | 25.1 | 26.5 | 27.9 | 29.3 | 30.7 |
| Size | US 12 / EU 44 / UK 16 | US 14 / EU 46 / UK 18 | US 16 / EU 48 / UK 20 | US 18 / EU 50 / UK 22 | US 20 / EU 52 / UK 24 |
| Bust, cm | 100 | 104 | 108 | 112 | 116 |
| Waist, cm | 80 | 84 | 88 | 92 | 96 |
| Hips, cm | 106 | 110 | 114 | 118 | 122 |
| Upper arm, cm | 32.1 | 33.5 | 34.9 | 36.3 | 37.7 |
Choosing a size for a protruding tummy
For women: to choose the right size for bottom garments, use the hip measurement plus the tummy protrusion
To sew these trousers, choose fabrics with the following properties:
- medium weight, soft, low or medium stretch
- the coating can be made from polyurethane, polyurethane foam and polyvinyl chloride
- the fiber content of the backing can include natural fibers (cotton), artificial fibers (viscose) and synthetics (polyester)
- the following fabrics are recommended: faux leather, faux suede with a woven or suede backing, real leather
The trousers in the photo are made of faux leather. The fabric is medium weight, pliable, soft and with very little stretch. The fiber content is a blend: 45% polyurethane and 55% viscose. The fabric weight is 360 g/m2.
1. Main fabric, 360 g/m2, 140 cm wide, with a directional print/nap, in meters:
Height, cm | Size | ||||||
34–40 | 42 | 44 | 46 | 48 | 50 | 52 | |
1 (154–160) | 1.4 | 1.55 | 1.6 | 1.7 | 1.7 | 1.8 | 1.85 |
2 (162–168) | 1.45 | 1.6 | 1.65 | 1.7 | 1.75 | 1.85 | 1.9 |
3 (170–176) | 1.5 | 1.7 | 1.75 | 1.8 | 1.8 | 1.85 | 1.95 |
4 (178–184) | 1.55 | 1.75 | 1.8 | 1.85 | 1.9 | 1.95 | 2 |
Main fabric, 360 g/m2, 55" wide, with a directional print/nap, in yards:
Height, ft | Size | ||||||
34–40 | 42 | 44 | 46 | 48 | 50 | 52 | |
1 (5’1”–5’3”) | 1 1/2 | 1 3/4 | 1 3/4 | 1 7/8 | 1 7/8 | 2 | 2 |
2 (5’4”–5’6”) | 1 5/8 | 1 3/4 | 1 3/4 | 1 7/8 | 1 7/8 | 2 | 2 1/8 |
3 (5’7”–5’9”) | 1 5/8 | 1 7/8 | 1 7/8 | 2 | 2 | 2 | 2 1/8 |
4 (5’10”–6’1”) | 1 3/4 | 1 7/8 | 2 | 2 | 2 1/8 | 2 1/8 | 2 1/8 |
2. Interfacing, 50 g/m2, 140 cm (55") wide, for all heights:
Size | 34–40 | 42–46 | 48–50 | 52 |
meters | 0.3 | 0.35 | 0.4 | 0.45 |
yards | 3/8 | 3/8 | 3/8 | 1/2 |
IMPORTANT! When purchasing fabric, please account for shrinkage and buy 5% more than required.
3. Lining fabric, 140 cm (55") wide, with a directional print — 0.3 m (3/8 yd)
4. One closed-bottom metal zipper No. 5, 20 cm (7 7/8") long, for all sizes in all heights
5. Two top zipper stoppers for adjusting the zipper length
6. Stitched straight-grain fusible stay tape, 1 cm (3/8") wide — 3 m (3 1/4 yd)
7. Paper-backed fusible web tape, 1 cm (3/8") wide — 10 m (10 7/8 yd)
8. Double-sided adhesive tape, 1 cm (3/8”) wide — 2 m (2 1/8 yd)
9. One set-in snap, 0.7–1 cm (1/4–3/8”) in diameter
10. Matching thread — 5 spools (1 spool for the sewing machine + 4 spools for the overlocker)
11. Matching topstitching thread (for example, Madeira No. 35) — 1 spool
- sewing machine for construction
- overlocker for finishing raw edges of the slash pocket lining. It can be replaced with a stretch overlock stitch or a zigzag stitch on the sewing machine (overlock or zigzag stitch width 2–3 mm, stitch length 2.5 mm)
- stitch-in-the-ditch foot for the sewing machine (optional)
- one-sided foot for the sewing machine to attach the zipper
- teflon or walking foot for the sewing machine
- press tool for installing snaps
Ease type | Ease measurement, cm | Ease measurement, in |
Waistline ease | 1.4–2.5 | 1/2–1 |
Hipline ease | -2.1 – -3.4 | -7/8 – -1 3/8 |
Height, cm | Side seam length including waistband, cm |
1 (154–160) | 107.9–109.8 |
2 (162–168) | 112.1–114 |
3 (170–176) | 116.4–118.3 |
4 (178–184) | 120.6–122.5 |
Height, ft | Side seam length including waistband, in |
1 (5’1”–5’3”) | 42 1/2–43 1/4 |
2 (5’4”–5’6”) | 44 1/8–44 7/8 |
3 (5’7”–5’9”) | 45 7/8–46 5/8 |
4 (5’10”–6’1”) | 47 1/2–48 1/4 |
Finished hem width for all heights
Size | 34 | 36 | 38 | 40 | 42 | 44 | 46 | 48 | 50 | 52 |
cm | 25.5 | 26 | 26.4 | 26.9 | 27.3 | 27.8 | 28.2 | 28.7 | 29.1 | 29.6 |
inches | 10 | 10 1/4 | 10 3/8 | 10 5/8 | 10 3/4 | 11 | 11 1/8 | 11 1/4 | 11 1/2 | 11 5/8 |
Once the order is paid, within 1 minute you will receive an email with the details of the order and a link to your personal account, where the following will be available for download:
1. The pdf pattern in your chosen size, in the following formats: Letter, A4, A0 and plotter format. The size of the plotter format is indicated in the name of the document. You will need a plotter printer that can print at least 900 mm width.
2. Detailed instructions which include cutting layouts, construction steps accompanied by photos, as well as instructions on how to work with Vikisews patterns (printing, taping, adjusting, sewing terminology).
If you have any questions, please let us know at info@vikisews.com
No reviews found